Advertisement

NEW P4 hack

topic posted Mon, April 26, 2004 - 12:49 PM by  B-
Share/Save/Bookmark
Satellite P4 Card hack released

Downloaded From www.newbigals.com
I take no credit in making this script. I just fixed the line
errors it was getting.

Testing With T911 Loader

THIS WILL NOT HURT YOUR CARD ( For P4Hack Program )

1. Flash your loader with wt2plus xp flash provided.
2. Now Set Programer to 5 open only.
3. Open Winexp set to p2 setting.
4. Now go to program setting and click that.
5. Uncheck: LogTransactions
6. Uncheck: Display Fuse After Each Script
7. Uncheck: Display USW After Each Script
8. Click OK.
9. Close WinExplorer.
10. Unplug your programer.
11. Put your card in your programer and plug back in.
Both lights should come on. This is called ( Pheonix Mode )
12. Open P4Hack.
13. Click Run Script. A box will appear.
Put the number ( 1 ) in the space required.
14. Click OK

During the reading. If you encounter this problem.

Script Error on Line 113
Sc.Read: Timeout Reading Data From Card -
2309 Bytes Requested, 500 Bytes R

Just follow these instructions. It should fix it.

When you get this "Script Error on Line 113
Sc.Read: Timeout Reading Data From Card - 2309 Bytes Requested,
500 Bytes Read

Change the 2309 bytes req. to 500 and save the script.
Then run the saved script again.When you get another error repeat
what you just did, changing the bytes req. to the # you get from
the bytes read. SAVE IT again, Repeat the whole thing saving each
time until there are no errors.
Remember to run the newest saved script each time.

This should run without errors eventually after replacing the #'s
around.


Part 1
posted by:
B-
offline B-
Advertisement

Recent topics in "DefCon"